商铺名称：河北瑞博橡塑制品有限公司
联系人：王伟（先生）
联系手机：
固定电话：
企业邮箱：3407742055@QQ.COM
联系地址：河北省衡水市景县留府工业区
邮编：53500
联系我时，请说是在新塑胶网上看到的，谢谢！
地下车库cb型橡胶止水带型号
CB型橡胶止水带、CB中埋式橡胶止水带,CB型止水带CB型止水带是指中间有孔的中埋式止水带，可分为CB型橡胶止水带、CB型塑料止水带两类。主要适用于各种混凝土构筑物的伸缩缝、沉降缝及防震缝等，具有与混凝土锚固紧密、止水密封和适应变形缝伸缩变形的能力优秀等特点，是我公司根据多年生产经验，并结合《给水排水工程混凝土构筑物变形缝设计规程》CECS117：2000开发生产的一种新型中埋式止水带.设计及选用标准：在工程设计及施工选用过程中，CB型止水带的宽度及厚度应按以下条件确定1、水压小于4m,水平和垂直变形量不超过10mm时，止水带的宽度不宜小于200mm，厚度不宜小于5mm；2、水压为4-8m，水平和垂直变形量不超过30mm时，CB型止水带的宽度不宜小于300mm，厚度不宜小于6mm；3、水压大于8m,水平和垂直变形量超过30mm时，CB型止水带的宽度不宜小于350mm,厚度不宜小于8mm；4、水压不大于8m,水平变形量不超过20mm，当无垂直变形时，CB型止水带的宽度不宜小于200mm,厚度不宜小于5mm。除此之外，当结构断面尺寸大于500mm时，CB型止水带的宽度不宜小于300mm，当CB型止水带进行弯曲放置时，其转弯半径不得小于300mm。常用规格：CB200×5-20CB250×6-30CB300×6-30CB350×8-30CB500×10-50
CB rubber waterproof belt, CB embedded rubber water stop, CB type water stop CB type water stop belt refers to the middle of the hole of the buried water stop, can be divided into CB rubber water stop, CB plastic water stop two categories. The main application of telescopic structures in various concrete seam, settlement joints and seismic joints, with close, anchorage and concrete seal and adapt to the ability of deformation joint expansion deformation of excellent characteristics, is my company according to many years of production experience, combined with the "water supply and drainage engineering concrete deformation joint design of" CECS117:2000 development and production a new type of medium buried waterstop structure. The design and selection criteria: in the selection of engineering design and construction process, the width and thickness of CB type waterstop shall be determined according to the following 1, the water pressure is less than 4m, the horizontal and vertical deformation is not more than 10mm, the sealing belt width of not less than 200mm, the thickness should not be less than 5mm; 2, the water pressure is 4-8M, the horizontal and vertical deformation is not more than 30mm, CB type strip width should not be less than 300mm, the thickness of not less than 6mm; 3, the pressure is greater than 8m, The horizontal and vertical deformation of more than 30mm, CB type strip width should not be less than 350mm, the thickness of not less than 8mm; 4, the water pressure is greater than 8m, the level of deformation is not more than 20mm, when no vertical deformation, CB strip width of not less than 200mm, the thickness of not less than 5mm. In addition, when the section size of the structure is greater than 500mm, the width of CB type water stop belt should not be less than 300mm, and when the CB type water stop strip is bent, the turning radius of the 300mm type water stop band shall not be less than 20 mm. Commonly used specifications: CB200× 5-20CB250× 6-30CB300× 6-30CB350× 8-30CB500× 10-50
地下车库cb型橡胶止水带型号
Performance characteristics:
1． 我公司生产的橡胶止水带是采用国家标准GB18173.2-2000标准组织生产的，尺寸公差一律按国家标准执行，如用户有特殊要求，可按用户要求制造
1. the rubber water stop produced by our company is produced by the national standard GB18173.2-2000 standard. The size tolerance is carried out according to the national standard. If the user has special requirements, it can be manufactured according to the requirements of the user
2． 橡胶止水带型号以分类别分类编号，以方便设计参考和用户定货。<br />
2. rubber sealing tape type is classified and numbered, so as to facilitate design reference and user order. <br / >
3． 我公司可按用户要求生产各种形状、尺寸的橡胶止水带，另外还可为不同工程、不同部位的需要备有十字型、丁字型、斜度型和内外转角型产品，可适用于任何设计要求。
3. my company can according to the production of various shapes and sizes of rubber sealing requirements of users also need, for different parts of the project, a cross shaped, inclination angle and internal and external products, can be applied to any design requirements.
4． 橡胶止水带在运输时，应要避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所保持-10-+30，相对湿度40%-80%。
4. rubber sealing strip during transportation, should avoid direct sunlight, do not contact with heat, oil and harmful solvent. The finished product should be straight and flat, without heavy pressure. Storage place kept -10-+30, relative humidity 40%-80%.
地下车库cb型橡胶止水带型号
