美国SABIC LEXAN PC DMX9455A销售全国
美国SABIC LEXAN PC DMX9455A销售全国
产品价格：￥0（人民币）
  • 规格：DMX9455A
  • 发货地：广东东莞
  • 品牌：
  • 最小起订量：1千克
    • QQ洽谈 点击询价 进入商铺
    东莞市添盈塑胶原料有限公司
    免费会员
    会员级别：试用会员
    认证类型：企业认证
    企业证件：通过认证
    认证信息：东莞市添盈塑胶原料有限公司

    商铺名称：东莞市添盈塑胶原料有限公司

    联系人：罗军（先生）

    联系手机：

    固定电话：

    企业邮箱：363743799@qq.com

    联系地址：东莞市虎门镇南栅社区第六工业区民昌路13号2-3号铺

    邮编：

    联系我时，请说是在新塑胶网上看到的，谢谢！

    商品详情

      美国SABIC LEXAN PC DMX9455A是一个标准的流程，阻燃，耐划伤改进透明的聚碳酸酯共聚树脂





      Material Notes:
      Lexan* DMX9455A is a standard flow, flame retardant, transparent polycarbonate copolymer resin with improved scratch resistance.This data was supplied by SABIC-IP for the Americas region.
      Physical Properties Metric English Comments
      Specific Gravity 1.20 g/cc
      		1.20 g/cc
      		ASTM D 792
      Density 1.17 g/cc
      		0.0423 lb/in3
      		ASTM D 792
      1.17 g/cc
      		0.0423 lb/in3
      		ISO 1183
      Water Absorption 0.080 %

      @Time 86400 sec
      		0.080 %

      @Time 24.0 hour
      		ASTM D 570
      Moisture Absorption at Equilibrium 0.13 %
      		0.13 %
      		23°C / 50% RH; ISO 62
      0.13 %
      		0.13 %
      		50% RH; ASTM D 570
      0.28 %

      @Temperature 23.0 °C
      		0.28 %

      @Temperature 73.4 °F
      		ASTM D 570
      0.040 %

      @Time 86400 sec
      		0.040 %

      @Time 24.0 hour
      		50% RH; ASTM D 570
      Water Absorption at Saturation 0.27 %

      @Temperature 23.0 °C
      		0.27 %

      @Temperature 73.4 °F
      		ISO 62
      Linear Mold Shrinkage, Flow 0.0050 - 0.0080 cm/cm

      @Thickness 3.20 mm
      		0.0050 - 0.0080 in/in

      @Thickness 0.126 in
      		SABIC Method
      Melt Flow 13 g/10 min

      @Load 1.20 kg,
      Temperature 300 °C
      		13 g/10 min

      @Load 2.65 lb,
      Temperature 572 °F
      		[cm^3/10 min] Melt Volume Rate; ISO 1133
      14.5 g/10 min

      @Load 1.20 kg,
      Temperature 300 °C
      		14.5 g/10 min

      @Load 2.65 lb,
      Temperature 572 °F
      		ASTM D 1238
      Mechanical Properties Metric English Comments
      Hardness, Rockwell L 108
      		108
      		ASTM D 785
      Hardness, Rockwell M 93
      		93
      		ASTM D 785
      Hardness, H358/30 128 MPa
      		18600 psi
      		ISO 2039-1
      Tensile Strength at Break 60.0 MPa
      		8700 psi
      		50 mm/min; ISO 527
      65.0 MPa
      		9430 psi
      		Type I, 50 mm/min; ASTM D 638
      Tensile Strength, Yield 80.0 MPa
      		11600 psi
      		Type I, 50 mm/min; ASTM D 638
      80.0 MPa
      		11600 psi
      		50 mm/min; ISO 527
      Elongation at Break 40 %
      		40 %
      		50 mm/min; ISO 527
      70 %
      		70 %
      		Type I, 50 mm/min; ASTM D 638
      Elongation at Yield 7.0 %
      		7.0 %
      		Type I, 50 mm/min; ASTM D 638
      7.0 %
      		7.0 %
      		50 mm/min; ISO 527
      Tensile Modulus 2.45 GPa
      		355 ksi
      		1 mm/min; ISO 527
      2.90 GPa
      		421 ksi
      		50 mm/min; ASTM D 638
      Flexural Yield Strength 108 MPa
      		15700 psi
      		2 mm/min; ISO 178
      120 MPa
      		17400 psi
      		1.3 mm/min, 50 mm span; ASTM D 790
      Flexural Modulus 2.45 GPa
      		355 ksi
      		2 mm/min; ISO 178
      2.60 GPa
      		377 ksi
      		1.3 mm/min, 50 mm span; ASTM D 790
      Izod Impact, Notched 0.300 J/cm

      @Temperature 23.0 °C
      		0.562 ft-lb/in

      @Temperature 73.4 °F
      		ASTM D 256
      0.300 J/cm

      @Temperature -30.0 °C
      		0.562 ft-lb/in

      @Temperature -22.0 °F
      		ASTM D 256
      Izod Impact, Unnotched NB

      @Temperature 23.0 °C
      		NB

      @Temperature 73.4 °F
      		ASTM D 4812
      Izod Impact, Notched (ISO) 4.00 kJ/m2

      @Temperature -30.0 °C
      		1.90 ft-lb/in2

      @Temperature -22.0 °F
      		80*10*3; ISO 180/1A
      5.00 kJ/m2

      @Temperature 23.0 °C
      		2.38 ft-lb/in2

      @Temperature 73.4 °F
      		80*10*3; ISO 180/1A
      Izod Impact, Unnotched (ISO) 45.0 kJ/m2

      @Temperature -30.0 °C
      		21.4 ft-lb/in2

      @Temperature -22.0 °F
      		80*10*3; ISO 180/1U
      NB

      @Temperature 23.0 °C
      		NB

      @Temperature 73.4 °F
      		80*10*3; ISO 180/1U
      Charpy Impact Unnotched 4.70 J/cm2

      @Temperature -30.0 °C
      		22.4 ft-lb/in2

      @Temperature -22.0 °F
      		Edgew 80*10*3 sp=62mm; ISO 179/1eU
      NB

      @Temperature 23.0 °C
      		NB

      @Temperature 73.4 °F
      		Edgew 80*10*3 sp=62mm; ISO 179/1eU
      Charpy Impact, Notched 0.300 J/cm2

      @Temperature 23.0 °C
      		1.43 ft-lb/in2

      @Temperature 73.4 °F
      		V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA
      0.300 J/cm2

      @Temperature -30.0 °C
      		1.43 ft-lb/in2

      @Temperature -22.0 °F
      		V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA
      Impact Test 30.0 J

      @Temperature 23.0 °C
      		22.1 ft-lb

      @Temperature 73.4 °F
      		Instrumented Impact Total Energy; ASTM D 3763
      Taber Abrasion, mg/1000 Cycles 10

      @Load 1.00 kg
      		10

      @Load 2.20 lb
      		CS-17; ASTM D 1044
      10

      @Load 1.00 kg
      		10

      @Load 2.20 lb
      		CS-17; SABIC Method
      Thermal Properties Metric English Comments
      CTE, linear, Parallel to Flow 70.0 μm/m-°C

      @Temperature -40.0 - 95.0 °C
      		38.9 μin/in-°F

      @Temperature -40.0 - 203 °F
      		ASTM E 831
      70.0 μm/m-°C

      @Temperature 23.0 - 80.0 °C
      		38.9 μin/in-°F

      @Temperature 73.4 - 176 °F
      		ISO 11359-2
      CTE, linear, Transverse to Flow 70.0 μm/m-°C

      @Temperature -40.0 - 95.0 °C
      		38.9 μin/in-°F

      @Temperature -40.0 - 203 °F
      		ASTM E 831
      70.0 μm/m-°C

      @Temperature 23.0 - 80.0 °C
      		38.9 μin/in-°F

      @Temperature 73.4 - 176 °F
      		ISO 11359-2
      Specific Heat Capacity 1.40 J/g-°C
      		0.335 BTU/lb-°F
      		ASTM C 351
      Thermal Conductivity 0.200 W/m-K
      		1.39 BTU-in/hr-ft2-°F
      		ASTM C 177
      0.200 W/m-K
      		1.39 BTU-in/hr-ft2-°F
      		ISO 8302
      Hot Ball Pressure Test <= 140 °C
      		<= 284 °F
      		IEC 60695-10-2
      Deflection Temperature at 0.46 MPa (66 psi) 131 °C
      		268 °F
      		Flatw 80*10*4 sp=64mm; ISO 75/Bf
      133 °C

      @Thickness 3.20 mm
      		271 °F

      @Thickness 0.126 in
      		unannealed; ASTM D 648
      Deflection Temperature at 1.8 MPa (264 psi) 118 °C
      		244 °F
      		Flatw 80*10*4 sp=64mm; ISO 75/Af
      119 °C

      @Thickness 3.20 mm
      		246 °F

      @Thickness 0.126 in
      		unannealed; ASTM D 648
      Vicat Softening Point 138 °C
      		280 °F
      		Rate B/50; ISO 306
      139 °C
      		282 °F
      		Rate B/50; ASTM D 1525
      140 °C
      		284 °F
      		Rate B/120; ISO 306
      Flammability, UL94 V-2

      @Thickness 1.50 mm
      		V-2

      @Thickness 0.0591 in
      		UL 94 by SABIC-IP
      V-0

      @Thickness 3.00 mm
      		V-0

      @Thickness 0.118 in
      		UL 94 by SABIC-IP
      Optical Properties Metric English Comments
      Refractive Index 1.584
      		1.584
      		ASTM D 542
      1.584
      		1.584
      		ISO 489
      Haze <= 0.80 %

      @Thickness 2.54 mm
      		<= 0.80 %

      @Thickness 0.100 in
      		ASTM D 1003
      Transmission, Visible 88 %

      @Thickness 2.54 mm
      		88 %

      @Thickness 0.100 in
      		ASTM D 1003
      Descriptive Properties Value Comments
      Ball Pressure Test, 125°C +/- 2°C Passes
      		IEC 60695-10-2
      Erichson scratch depth, 6N, micrometer 14
      		SABIC Method
      Pencil Hardness test, 1kgf H
      		ASTM D 3363

    在线询盘/留言
    • 产品推荐
    精品推荐
    0571-87774297